Do it yourself Tips
Effective pressure washing involves four key stages to ensure a thorough and safe clean. 1. Preparation – Clear the area of obstacles, cover delicate surfaces, and apply a pre-treatment if needed. 2. Application – Use the right pressure and nozzle for the surface to apply water or cleaning solution evenly. 3. Cleaning – Move methodically, maintaining a consistent distance to avoid damage and ensure even results. 4. Rinse & Inspection – Rinse thoroughly and inspect the area to ensure all grime is removed and no spots are missed. Following these steps helps protect your surfaces and achieve professional-level results.
Site Preparation & Surface Assessment
-
Remove furniture, vehicles, and obstacles from the work area
-
Cover sensitive landscaping, electrical outlets, and fixtures
-
Identify surface material (concrete, wood, vinyl, brick, etc.)
-
Check for cracks, loose paint, or damage that may need special care
-
Apply eco-friendly pre-treatment solutions to loosen dirt and grime
This stage ensures safety and sets the foundation for a thorough clean.
Pressure Washing Application
Once the area is prepped, we begin the cleaning process:
-
Select the appropriate pressure setting and nozzle for the surface
-
Apply water or cleaning solution evenly across the area
-
Use commercial-grade equipment to break down mold, mildew, algae, oil stains, and more
-
Adjust technique based on surface type to avoid etching or damage
Deep Cleaning & Detail Work
This is where the transformation happens:
-
Clean in overlapping, consistent strokes to avoid streaks
-
Focus on high-traffic or heavily soiled areas
-
Use surface cleaners or rotary tools for large flat areas
-
Perform spot treatments for stubborn stains or buildup
-
Clean edges, corners, and hard-to-reach areas by hand if needed
Rinsing, Final Inspection & Touch-Ups
The final stage ensures everything is spotless and up to our standards:
-
Rinse all surfaces thoroughly to remove soap and debris
-
Inspect the area for missed spots, damage, or residue
-
Perform any necessary touch-ups
-
Remove protective coverings and return items to their place
-
Walk through the job with the client to ensure satisfaction